madVR hdr Measure 208
本帖最后由 gartour 于 2025-2-24 01:17 编辑以前的帖子归档了，补一个
new build 208 up:
http://madshi.net/madVRhdrMeasure208.zip
No real changes, except I've made the scene change detection options available again (temporarily) because Fer15 wants to play around with those again to maybe improve scene detection reliability.
new build 207 released
https://madshi.net/madVRhdrMeasure207.zip
Changes:
1) Fer15 has cooked up another new promising TM curve, called "Luna".
2) I've added a new option called "no scene change if APL is within [...]".
3) I've fixed an issue where a Wednesday scene flickered.
new test build 206 released
http://madshi.net/madVRhdrMeasure206.zip
There are 2 new tone mapping curves, both created by Fer15 (thank you!!). The new curves are (sort of) improvements of the Mercury and Saturn curves. Hopefully they look even better and might have fewer brightness instabilities?
Just got the complaint myself. Here's a new build (no real changes), set to expire in 6 months from now:
http://madshi.net/madVRhdrMeasure205.zip
new build 204 released:
http://madshi.net/madVRhdrMeasure204.zip
Changes:
1) Removed "alternative histogram" option.
2) Reordered the options once more by topic.
3) Fixed: Custom TM curves weren't working.
released new build 203
http://madshi.net/madVRhdrMeasure203.zip
Changes:
1) Fixed: 64bit build crashed.
released new build 202
http://madshi.net/madVRhdrMeasure202.zip
Changes:
1) Dialed in HS 0.5, Boost 1.75.
2) Reordered the remaining options.
new build 201 released
http://madshi.net/madVRhdrMeasure201.zip
Changes:
1) Replaced "gamut roll-off" controls with a new "highlight saturation" dropdown box, going from -4 (0/17) to +4 (80/17). Value +5 disables gamut roll-off completely.
new build 200 released
http://madshi.net/madVRhdrMeasure200.zip
Changes:
1) "Added headroom" option removed, now hard coded to 10.
new build 199 released
http://madshi.net/madVRhdrMeasure199.zip
Changes:
1) Renamed "baked-in desat" to "global desaturation" and moved it to its new (and final) home as a permanent option.
2) Increased "global desat" range to 0% - 200%, just for testing purposes.
3) Added some finer steps for the "highlight sat & boost" options.
4) Removed "disable luma repair" option.
5) Removed ACES.
6) Moved "custom gamut" options to a different place.
new build 198 released
http://madshi.net/madVRhdrMeasure198.zip
Changes:
1) Removed "fix oversaturated luminance" option (now always active).
2) Removed "out of gamut darkening" option.
3) Removed "HS gamut boost" option.
4) Added "highlight sat boost" checkbox to make it easier to turn the HS compression boost on/off.
new build 197 released
http://madshi.net/madVRhdrMeasure197.zip
Changes:
1) Fixed some banding problems with the new "fix oversaturated luminance" option, when using gamut roll-off.
new build 196 released
http://madshi.net/madVRhdrMeasure196.zip
Changes:
1) Fixed new option "fix oversaturated luminance" once more.
new build 195 released
http://madshi.net/madVRhdrMeasure195.zip
Changes:
1) Fixed: Using the new "fix oversaturated luminance" option together with "gamut roll-off" turned reds pink(ish).
new build 194 released
http://madshi.net/madVRhdrMeasure194.zip
Changes:
1) Fixed: The new "fix oversaturated luminance" option was only active with "gamut roll-off" disabled.
new build 193 released
http://madshi.net/madVRhdrMeasure193.zip
Changes:
1) Added new "fix oversaturated luminance" option.
new build 192 released
http://madshi.net/madVRhdrMeasure192.zip
Changes:
1) Undid the change that caused heavy artifacts in some colorbar test patterns.
2) Added "alternative ACES math" option, which may look a bit better (or not, please test and let me know).
3) Added "don't hue correct blue" option which still applies ACES compression to blue, but doesn't try to fix the hue afterwards. This keeps a lot more saturation, for some reason.
4) Added "HS gamut boost" option, which allows you to boost the HS value for pixels that are near to (and beyond) the output gamut boundary.
5) Added "HS compress boost" option, which allows you to boost the HS value for pixels that were compressed a lot by tone mapping.
new build 191 released
http://madshi.net/madVRhdrMeasure191.zip
new build 190 released
http://madshi.net/madVRhdrMeasure190.zip
Changes:
1) Removed a whole bunch number of lum method related options.
2) Simplified the code to only support the final Custom Sep and Stim options.
3) Changed the ACES math to properly support "infinite" Power, which actives for any Power values bigger than 50.
new build 189 released
http://madshi.net/madVRhdrMeasure189.zip
Changes:
1) Custom Sep now has a new "added headroom" option.
new build 188 released
http://madshi.net/madVRhdrMeasure188.zip
Changes:
1) Removes ACES limits, these are auto calculated now.
2) Calc button has no options now, it simply calculates the thresholds based on protecting the colorchecker colors.
3) Removed "improved stim measurements" and "improved hk math" and "process ACES in BT.2020" options.
4) Replaced lum method dropdown box with a "use Custom Sep" check box.
5) Added "clip at 4000 nits" option. See remarks below.
6) Added "stim punch boost" option. See remarks below.
7) Added "dyn tuning boost" option. See remarks below.
new build 187 released
http://madshi.net/madVRhdrMeasure187.zip
Changes:
1) The frame measurements (peak + histogram) were optimized for Max/Sep/Custom Sep, but not for Stim. So now I've added a new option called "improved stim measurements". This seems to improve stim a bit more, so please give this a go and let me know if this is an improvement for you, as well. FWIW, I've found that it gives back some punch I was missing, e.g. in the Mad Max lightning frame.
2) aron7awol suggested a tweak to his HK math, so I added an option to activate this change. I'm not sure if I like what this change does, but you guys please give it a try and let me know your thoughts.
http://madshi.net/madVRhdrMeasure186.zip
new test build 185 released
http://madshi.net/madVRhdrMeasure185.zip
Changes:
- custom gamut back in
new test build 184 released
http://madshi.net/madVRhdrMeasure184.zip
Changes:
1) HK strength can now be adjusted separately for Red, Green and Blue.
new test build 183 released
http://madshi.net/madVRhdrMeasure183.zip
Changes:
1) Temporarily removed "custom gamut" feature (just to make room in the settings dialog), will be back after we're done with HK lum method testing.
2) Added lum method option back in with "Custom Sep, Sep, Stim and Max".
3) Added "HK effect" option, with a strength option (0-100%). This effects all lum methods except "Max".
4) Added Custom Sep RGB edit fields back in.
new build 182 released
http://madshi.net/madVRhdrMeasure182.zip
Changes:
1) Changed ACES label "rgb" to "cmy", just cosmetics.
2) Swapped order of "split" vs "limit" options, because "thresh" and "split are closely related.
3) Added a "calc" button which allows calculating thresh, limit and split values for your specified output gamut (including support for custom gamuts).
new build 181 released
http://madshi.net/madVRhdrMeasure181.zip
Changes:
1) ACES "split" parameter is now separately available for R, G, B.
2) Separated the "map" and "darken" features into separate dropdown boxes. Now you can also apply darken more gradually (in 10% steps).
test build 180 released
http://madshi.net/madVRhdrMeasure180.zip
Changes:
1) "map" is now available in 10% steps, to give you more control.
2) The ACES "repair hue & lum" options were removed (always on now).
3) Added ACES "split" option to give you more control over the compression curve.
4) Modified the ACES compression formulas to give us more control.
5) Added ACES "process in BT.2020" option, to allow you to apply ACES compression in BT.2020 instead of the output gamut.
new build 179 released
http://madshi.net/madVRhdrMeasure179.zip
Changes:
1) fixed: ACES compression always worked in BT.2020, ignored target gamut
new build 178 released
http://madshi.net/madVRhdrMeasure178.zip
Changes:
1) added ACES gamut compression with roll-off
2) added "repair hue" and "repair lum" options for ACES gamut compression
http://madshi.net/madVRhdrMeasure177.zip
Changes:
"out of gamut handling" now has a "darken" feature which can darken out of gamut colors
"out of gamut handling" now has an improved "map" option
map option now allows strength with 25%, 50%, 75% and 100%
http://madshi.net/madVRhdrMeasure176.zip
Changes:
1) Fixed: BT.2020 output with "clip" resulted in black or black&white screen.
2) Fixed: HDR output with custom gamut was broken.
http://madshi.net/madVRhdrMeasure175.zip
Changes:
- added "out of gamut handling" option, with "ignore, clip, map" choices
new build 174 released
http://madshi.net/madVRhdrMeasure174.zip
build 173 released
http://madshi.net/madVRhdrMeasure173.zip
Only change is that the following hard coded keyboard shortcuts were added (only temporarily)
new build 172
http://madshi.net/madVRhdrMeasure172.zip
new build 171
http://madshi.net/madVRhdrMeasure171.zip
Changes:
1) Log Very Very (Very) Low should work now.
2) Re-added "repair luminance" option (temporarily).
3) Simplified gamut roll-off to be hue-independent.
4) Changed "baked-in desat" to a 0-100% setting in 10% steps.
5) Added custom gamut option, but it's not working yet (hopefully tomorrow).
new build 170:
http://madshi.net/madVRhdrMeasure170.zip
Changes:
1) Removed a few options which are (probably) no longer needed/useful.
2) Added option "disable baked-in desat".
3) Added "Log Very Very Low" and "Log Very Very Very Low" HSTM / Contrast Recovery options.
new build 169 released
http://madshi.net/madVRhdrMeasure169.zip
Changes:
1) Added the ability to define gamut roll-off per hue (with interpolation in between).
new build 168 released
http://madshi.net/madVRhdrMeasure168.zip
Fixed: Noise issue in Travel with my Pet, when using "HSTM: no brightening".
Changed: "HSTM: no brightening" is now only active when HSTM is used
new build 167 released
http://madshi.net/madVRhdrMeasure167.zip
Changes:
1) Hard coded "max3 variant 2" to be the new "max3", with fixed parameters. So all lum methods are "done" now.
2) Fixed: OSD elements didn't show in paused state.
The new build will not complain until start of February 2024, to give us some breathing room.
Some users reported graphical corruption (visible noise pixels) when using Custom Sep. Can you please double check if that still occurs with this new build? Thanks!
Next step: Finalize roll-off parameters and (ideally) also the highlight sat. Though, can we choose a fixed highlight sat value for each lum method? Or does it vary with the display peak luminance or the TM curve?
New build 166 up:
http://madshi.net/madVRhdrMeasure166.zip
Changes:
1) I've removed some lum methods.
2) I've dialed in the parameters of all the remaining "old" lum methods.
3) I've added "max3 variant 1" and "max3 variant 2", which still need to be dialed in.
New test build 165 released.
http://madshi.net/madVRhdrMeasure165.zip
Changes:
1) Removed "max3 mix" option, now hard coded to 0.
2) Fixed a Windows 11 specific problem with tons of "identifications" being added all the time, and profile shortcut keys not working (same cause). 还在更新啊！！我的天那~~我想更新了，就是不知道怎么搞，我自己用的是别人搞好以后封装一起，只需要我解压就能用的。。。。 这个版本好像没有包括unrar.dll，得从之前版本里拿过来，不然会报错 山河岁月 发表于 2022-9-27 01:02
这个版本好像没有包括unrar.dll，得从之前版本里拿过来，不然会报错
好久之前就不带了，包括注册和反注册bat也没有了。可以用普通版madvr的代替。 以后就在这个帖子继续更下去吧 165好似也提示要更新了 不看HDR的视频，用普通的madvr 跟楼主发的使用起来有区别么？ 是不是连madVR hdr Measure也不再更新了？ zangao 发表于 2023-1-30 20:19
是不是连madVR hdr Measure也不再更新了？
是的，因为他自己出了个madvr的播放器，需要为这个开路 snow5891 发表于 2023-1-30 21:16
是的，因为他自己出了个madvr的播放器，需要为这个开路
那还有过期一说吗？ zangao 发表于 2023-1-30 20:19
是不是连madVR hdr Measure也不再更新了？
没有停更。只是更新比以前慢多了。 snow5891 发表于 2023-1-30 21:16
是的，因为他自己出了个madvr的播放器，需要为这个开路
这个播放器叫啥名 manwomans 发表于 2023-1-31 02:03
这个播放器叫啥名
https://madvrenvy.com/
硬件，不是软件 manwomans 发表于 2023-1-31 02:03
这个播放器叫啥名
官方网站有，基础款的叫envy，1.5w美金左右 snow5891 发表于 2023-1-31 02:57
官方网站有，基础款的叫envy，1.5w美金左右
其实就是一台带HDMI in的卧式电脑，显卡最初是2080Ti，不知道新款换成4080没[偷笑] 本帖最后由 snow5891 于 2023-1-31 03:23 编辑
bluesky1234 发表于 2023-1-31 03:08
其实就是一台带HDMI in的卧式电脑，显卡最初是2080Ti，不知道新款换成4080没 ...
胜在人家有核心软件算法，卖这个价格合理，毕竟全世界没几家能做的。
动态映射做的最好的就是他了，其次就是jvc投影自带和如马根，巴可的机器也自带，（毕竟巴可和科视一样应用是商业领域，抖4K的机器都能卖你四五十万，原生4K直接百万，并且本身机器的噪音和拖拉机无异，没办法放在个人家庭，不属于消费类讨论范围）看看大法明年机器明年能不能带这种算法 bluesky1234 发表于 2023-1-31 03:08
其实就是一台带HDMI in的卧式电脑，显卡最初是2080Ti，不知道新款换成4080没 ...
3080，还不带ti snow5891 发表于 2023-1-31 02:57
官方网站有，基础款的叫envy，1.5w美金左右
就叫ENVY ，分Pro和Extreme，Extreme是旗舰版，国行7～8个W。HDR映射绝对牛，秒杀卢马根和一众自带HDR映射的投影机。 什么时候能支持杜比视界？ bbcaoyang 发表于 2023-1-31 05:27
就叫ENVY ，分Pro和Extreme，Extreme是旗舰版，国行7～8个W。HDR映射绝对牛，秒杀卢马根和一众自带HDR映 ...
秒杀应该不至于，可能会好一点点，毕竟pc端的madvr也能看出个八九来.
后面动态映射各家应该越来越成熟，毕竟hdr时代，都是映射，这算法应该是越来越普及，现阶段还是在这少数的几家掌握着. 有没有比较系统介绍madvrhdrmeasure的帖子或者文章，求一个。中英文都可以[傻笑] caocheng 发表于 2023-1-31 08:20
什么时候能支持杜比视界？
破解了的话，估计可以 gartour 发表于 2023-1-30 22:57
没有停更。只是更新比以前慢多了。
又提示要更新了，可以帮忙转一下吗？不知道去哪儿下，感谢。 这个能不能覆盖原来的madvr？ bbcaoyang 发表于 2023-1-31 05:29
牛叉牛叉 bbcaoyang 发表于 2023-1-31 05:29
老哥，请教下这个envy这机器支持外挂字幕么？如果支持的话，是像碟机那种支持程度，还是想安卓机那种连动态特效都支持？感谢 snow5891 发表于 2023-2-1 22:04
老哥，请教下这个envy这机器支持外挂字幕么？如果支持的话，是像碟机那种支持程度，还是想安卓机那种连动 ...
ENVY就是一个视频处理器，基本功能是hdr映射、1080P升4K升8K、下一步有真插帧功能，声音一般都是直接音画分离直接去功放的。所以不会去干“外挂字幕”这种播放机干的事 sonydboy 发表于 2022-12-3 11:41
不看HDR的视频，用普通的madvr 跟楼主发的使用起来有区别么？
没有 楼主更新的都是hdr方面 昨晚提示更新，但是又没有发现新版