|
本帖最后由 zerozerone 于 2023-4-25 22:12 编辑
测试版本 2023/04/25
SoC voltage for Ryzen 7000X3D series limited to a maximum of 1.30V to protect the CPU and motherboard.
Before running the USB BIOS Flashback tool, please rename the BIOS file (CX670EE.CAP) using BIOSRenamer.
Please note that this is a beta BIOS version of the motherboard which is still undergoing final testing before its official release. The UEFI, its firmware and all content found on it are provided on an “as is” and “as available” basis. ASUS does not give any warranties, whether express or limited, as to the suitability, compatibility, or usability of the UEFI, its firmware or any of its content. Except as provided in the Product warranty and to the maximum extent permitted by law, ASUS is not responsible for direct, special, incidental or consequential damages resulting from using this beta BIOS.
个人对这段文字的看法:测试版本、风险自甘(不确保可用性、适用性、可靠性,附带性能下降、物理损坏等等等直接或间接的损失,自行负责!!!)
包含SOC电压限制,不代表没有其他相关设置调整,更新此版本后的上限不等同于支持X3D的上个版本手动调整至1.30v具有的同等的电压上限
使用老版支持的版本的
安全做法手动调整SOC电压至1.2或以下,暂时弃用expo自动配置;再保守点,载入默认值,内存降到jedec标准频率、电压使用,关闭超频配参。等正式版发布。
以上仅作参考,风险自担。本人不怕烧全家,这就去升测试版去。
从个人记录的各版本expo下的电压状态:
0805 expo1.2x 之前的不晓得(到手是0705没记录直接升级到0805)
0922-1202 expo都是1.35 |
|